. : Products : .
| <<
Back To Products |
| Cold Rolled Spheriodized Annealed
Steel Strips |
| |
| Anil Special Steel Industries Ltd is one of the leading
players manufacturing medium/ high carbon and low alloys cold
rolled spheriodized annealed steel strips catering to domestic
as well as various international markets like USA, Europe, South
East Asia, Mediterranean countries, Middle East and all SAARC
countries. |
| |
 |
| Application
Industry |
 |
Cutting tool-
Hack Saws |
|
Power saws and
band saws |
|
Automobile
Industry- Clutch, Horn Diaphrams, Seat Belts and brake assemble |
|
Chain Links |
|
Circlips and
washers |
|
Medical-Surgical
Blades |
| |
| Manufacturing Capabilities |
|
| Width |
6mm to 395mm |
| Thickness |
0.2mm to 4.5mm |
| Finish |
Bright and Matt |
| Flatness |
When a five-meter
length of the strip is allowed to lay on a flat
surface no part of the strip shall lift more than
five mm from the flat surface by its own weight
|
| Grades |
High Carbon, Medium
Carbon, Low Carbon and alloy steel |
| Camber |
Maximum Tolerance
on edge camber in any 2000mm length: 10mm |
| Coil
Form |
In Slit width
or Mill width |
| Cut
Length |
Max length 3000mm
+ 2mm - Nil,
Minimum length 500mm + 2mm - Nil |
| Coil
Weight |
Minimum 1kg/mm
strip width, Maximum 8kg/mm strip width |
Coil
Dimensions
|
Coil I.D. can
be offered with 300mm, 400mm & 500mm |
| Packing |
The cold rolled
strips are packed with light coat of V.C.I oil followed
by wrapping with thick polythene film and finally
with Polythene lined Hessian strips. These are further
covered with Sea worthy G.I. sheets and strapped
on metallic pallets in case of exports. |
|
|
| |
| Tolerances |
| Our Tolerance Range
for Thickness |
| Preferred Nominal (Thickness
in mm) |
Permissible thickness
variation in the case of nominal width (in mm) |
| |
<125 |
>125<250 |
>250 |
| 0.10 to 0.12 |
0.008 |
0.012 |
0.015 |
| 0.15 to 0.20 |
0.012 |
0.015 |
0.020 |
| 0.25 to 0.35 |
0.015 |
0.020 |
0.025 |
| 0.40 to 0.50 |
0.020 |
0.025 |
0.030 |
| 0.60 to 0.90 |
0.025 |
0.030 |
0.035 |
| 1.00 to 1.20 |
0.030 |
0.035 |
0.045 |
| 1.50 to 2.00 |
0.035 |
0.045 |
0.055 |
2.50 to 4.00
|
0.045 |
0.055 |
0.070 |
|
|
| |
| Our Tolerance Range
for Width |
| In the case of nominal thickness
(in mm) |
Permissible variation
on nominal width (in mm) Plus & Minus |
| |
<125 |
>125<250 |
>250 |
| 0.10 to 0.40 |
0.150 |
0.200 |
0.300 |
| 0.40 to 1.50 |
0.200 |
0.300 |
0.300 |
| 1.50 to 2.50 |
0.300 |
0.400 |
0.500 |
| 2.50 & above |
0.400 |
0.500 |
0.600 |
|
|
| |
|
Chemistry / Standard
Equivalent Grades
|
| Grades |
C
|
Mn
|
P
|
S
|
Si
|
Ni
|
Cr
|
V
|
| |
%
|
%
|
%(Max)
|
%(Max)
|
%
|
%
|
%
|
%
|
| SAE-1040 |
0.36-0.44
|
0.60-0.90
|
0.04
|
0.05
|
0.15-0.30
|
----
|
----
|
----
|
| SAE-1045 |
0.42-0.50
|
0.60-0.90
|
0.04
|
0.05
|
0.15-0.30
|
----
|
----
|
----
|
| SAE-1050 |
0.47-0.55
|
0.60-0.90
|
0.04
|
0.05
|
0.15-0.30
|
----
|
----
|
----
|
| SAE-1055 |
0.52-0.60
|
0.60-0.90
|
0.04
|
0.05
|
0.15-0.30
|
----
|
----
|
----
|
| SAE-1060 |
0.55-0.66
|
0.60-0.90
|
0.04
|
0.05
|
0.15-0.30
|
----
|
----
|
----
|
| SAE-1065 |
0.59-0.70
|
0.60-0.90
|
0.04
|
0.05
|
0.15-0.30
|
----
|
----
|
----
|
| SAE-1070 |
0.65-0.76
|
0.60-0.90
|
0.04
|
0.05
|
0.15-0.30
|
----
|
----
|
----
|
| SAE-1075 |
0.69-0.80
|
0.40-0.70
|
0.04
|
0.05
|
0.15-0.30
|
----
|
----
|
----
|
| SAE-1080 |
0.74-0.88
|
0.60-0.90
|
0.04
|
0.05
|
0.15-0.30
|
----
|
----
|
----
|
| SAE-1085 |
0.80-0.94
|
0.70-1.00
|
0.04
|
0.05
|
0.15-0.30
|
----
|
----
|
----
|
| SAE-1095 |
0.90-1.04
|
0.30-0.50
|
0.04
|
0.05
|
0.15-0.30
|
----
|
----
|
----
|
| 75Cr1 |
0.75-0.85
|
0.60-0.90
|
0.04
|
0.05
|
0.15-0.30
|
----
|
0.20-0.50
|
----
|
| 125Cr1 |
0.10-1.30
|
0.60-0.90
|
0.04
|
0.05
|
0.15-0.30
|
----
|
0.20-0.50
|
----
|
| 50CrV4 |
0.45-0.55
|
0.50-0.80
|
0.04
|
0.05
|
0.15-0.30
|
----
|
0.80-1.20
|
0.10 Min
|
|
|
