. : Products : .
| << Back To Products |
| Hardened and Tempered Steel Strips |
| Anil Special Steel Industries Ltd has been a leader in Hardening and tempering technology
in India over past 31 years. Anil Special Steel Industries Ltd is equipped with the traditional oil quenching furnaces as
well as the most modern Lead quenching furnaces. With these manufacturing capabilities Anil Special Steel Industries Ltd offers
customer specific products for various applications. |
| |
| Application Industry |
 |
 |
Band Saw Blades for wood working |
|
Hand Saw for wood cutting |
|
Cross cut saws and Pit saws for wood cutting |
|
Flat springs for automobile Clutch plates |
|
Shims and Washers for automobile industries |
|
Circular Saw Blanks |
|
Engineering Industry |
|
Masonry and Agricultural tool |
|
Industrial knifes |
|
Stone cutting |
|
Spring etc. |
| |
| Manufacturing Capabilities |
|
| Width |
6mm to 400mm |
| Thickness |
0.10mm to 3.5mm |
| Finish |
Bright / Blue / Bronze and Grey |
| Edges |
Sheared, Round and square edge |
| Flatness |
Maximum 0.025mm in 25.4mm width |
| Grades |
High / Medium Carbon and Alloy steel |
| Camber |
Maximum Deviation +/- 0.50mm per 1000mm length |
| Cut Length |
Max length 3000mm + 2mm - Nil,
Minimum length 500mm + 2mm - Nil |
| Coil Weight |
Maximum 4.00kg/mm strip width |
Packing
|
The strips are normally packed with light coat of V.C.I.
oil followed wrapping with thick polythene film and finally with polythene lined Hessain
strips. These are further covered with sea worthy G.I. sheets and strapped on metallic
pallets in case of exports. |
|
|
| |
| Tolerances |
| Our Tolerance Range for Thickness |
| Preferred Nominal (Thickness in mm) |
Permissible thickness variation in the case of nominal
width (in mm) |
| |
<125 |
>125<250 |
>250 |
| 0.10 to 0.12 |
0.008 |
0.012 |
0.015 |
| 0.15 to 0.20 |
0.012 |
0.015 |
0.020 |
| 0.25 to 0.35 |
0.015 |
0.020 |
0.025 |
| 0.40 to 0.50 |
0.020 |
0.025 |
0.030 |
| 0.60 to 0.90 |
0.025 |
0.030 |
0.035 |
| 1.00 to 1.20 |
0.030 |
0.035 |
0.045 |
| 1.50 to 2.00 |
0.035 |
0.045 |
0.055 |
2.50 to 3.50
|
0.045 |
0.055 |
0.070 |
|
|
| |
| Our Tolerance Range for Width |
| In the case of nominal thickness (in mm) |
Permissible variation on nominal width (in mm) Plus
& Minus |
| |
<125 |
>125<250 |
>250 |
| 0.10 to 0.40 |
0.150 |
0.200 |
0.300 |
| 0.40 to 1.50 |
0.200 |
0.300 |
0.300 |
| 1.50 to 2.50 |
0.300 |
0.400 |
0.500 |
| 2.50 & above |
0.400 |
0.500 |
0.600 |
|
|
| |
| |
