Shalimar Group, Paper Machine, Mesh, Wire, Cloth, Doctor, Blades, Blade, Mesh, Coarse Mesh Wire Cloth, Filters, Fine Mesh, Nickel, Gaskets, Doctor Blades, Foundrinier Wire Cloth

	Corporate Home Page \| Feedback
	Coarse Mesh Wire Cloth\|Fine Mesh Wire Cloth\|Filter & Gasket\|Doctor Blade

Doctor Blades

Specially manufactured for Pulp & Paper Industries; the doctor Blades are used to keep the surfaces clean and smooth and to avoid scoring, pitting or other damages. Each Doctor Blade is designed to suit a specific application in order to obtain longest blade life and improved roll life. These are manufactured in wide range using different material Phosphor Bronze, Carbon Steel, Stainless Steel, Fiber (cotton) impregnated, HDPE, and Glass Epoxy laminated material, Maintaining accuracy and excellent surface Finish.

Users : Pulp and Paper Industries

Material	Length	Width	Thickness
Ph.Bronze Grade IV Grade III	Any Specified	Up to 125 mm Up to 152 mm Up to 152 mm Up to 300 mm	0.8 mm 1.25 & 1.50 mm 2.00 mm 3.0 mm & 4.0 mm
Stainless Steel AISI 304	Any Specified	Up to 125 mm Up to 152 mm Up to 152 mm Up to 152 mm	0.8 mm 1.10 mm 1.20 mm 1.50 mm
H & T Carbon Steel C-80/C-98	Any Specified	Up to 125 mm Up to 152 mm Up to 152 mm Up to 152 mm	0.8 mm 1.0 mm - 1.20 mm 1.4 mm - 1.60 mm 2.00 mm - 3.00 mm
Fiber (Cotton) Impregnated	Any Specified	Up to 125 mm	1.50 mm - 10.0 mm
HDPE	4500 mm Max	Up to 200 mm	2.0 mm - 15.0 mm
Glass Epoxy Laminated	Any Specified	Up to 175 mm	0.8 mm to 5.0 mm

Application	Roll Material	Doctor Blade Material
Application	Roll Material	Ph. Bronze	H & T Carbon Steel	Stainless Steel	Fibre/Cotton Impregnated Laminate	HDPE	Glass Eproxy Laiminate
Roll Surface	Hard Rubber	F	N	N	G	G	F
	Stonite	F	N	F	F	F	G
	Granite	N	N	G	F	F	G
	Micro Rock	N	N	G	F	F	G
	Black Diamond	N	N	N	F	F	G
	Ebonite	N	N	N	G	G	F
	Cast Iron	G	G	G	N	N	F
	Chilled Iron	G	F	G	N	N	F
	Fabricated Steel	G	N	G	N	N	F
	Bronze	F	N	F	G	F	F
	Chrome Plated	G	N	F	N	F	F
Temperature	Normal - 50 °C	G	G	G	G	G	G
	50 - 100 °C	G	G	G	F	F	F
	100 °C & above	F	G	G	F	F	F
Pressure	Below 0 - 0.20 Kg/Cm²	G	G	G	G	G	G
	0.20 - 1.0 Kg/Cm²	G	G	G	F	F	F
	1.0 Kg/Cm² & above	G	G	G	F	F	F
Wet Condition	Much	N	F	F	F	F	F
	Less	F	F	F	F	F	F
	Nearly Dry	G	G	F	F	F	F
G : Good F : Fair N : Not Advisable

Bevel Angle as per customer's Design to 10° to 90° or otherwise std. 45°

Rivets, Clips, Cups and slots as per requirement.

Physical & Chemical Properties of the blades can be furnished on request.

Other sizes for Doctor Blades and Creping Blades on Request